Balflex froza uno
DIN EN 853 1SN / SAE 100R1AT / ISO 1436 – 10.1002.
High pressure, single steel braid reinforced hydraulic hose
| Reference | # | DN | inch | SAE Dash |  |  |  |  |  |  | ||
| mm | mm | MPs | PSI | Mps | PSI | mm | kg/m | |||||
| 1SN-03 | 10.1002.03 | DN5 | 3/16” | -3 | 4,8 | 11,4 | 25 | 3700 | 100 | 14800 | 89 | 0,23 |
| 1SN-04 | 10.1002.04 | DN6 | 1/4” | -4 | 6,3 | 13 | 22,5 | 3300 | 90 | 13200 | 100 | 0,23 |
| 1SN-05 | 10.1002.05 | DN8 | 5/16” | -5 | 8 | 14,7 | 21,5 | 3200 | 85 | 12800 | 114 | 0,23 |
| 1SN-06 | 10.1002.06 | DN10 | 3/8” | -6 | 9,5 | 17,2 | 18 | 2700 | 72 | 10800 | 127 | 0,33 |
| 1SN-08 | 10.1002.08 | DN12 | 1/2” | -8 | 12,7 | 20,5 | 16 | 2400 | 64 | 9600 | 178 | 0,42 |
| 1SN-10 | 10.1002.10 | DN16 | 5/8” | -10 | 16 | 23,8 | 13 | 1900 | 52 | 7400 | 200 | 0,52 |
| 1SN-12 | 10.1002.12 | DN19 | 3/4” | -12 | 19 | 27,8 | 10.5 | 1600 | 42 | 6400 | 240 | 0,65 |
| 1SN-16 | 10.1002.16 | DN25 | 1” | -16 | 25,4 | 35,9 | 8,8 | 1300 | 35 | 5200 | 300 | 1 |
| 1SN-20 | 10.1002.20 | DN31 | 1.1/4” | -20 | 32 | 44 | 6,3 | 920 | 25 | 3680 | 419 | 1,3 |
| 1SN-24 | 10.1002.24 | DN38 | 1.1/2” | -24 | 38 | 50,8 | 5 | 730 | 20 | 2920 | 500 | 1,63 |
| 1SN-32 | 10.1002.32 | DN51 | 2” | -32 | 50,8 | 64,3 | 4 | 580 | 16 | 2320 | 630 | 2 |
| 1SN-40 | 10.1002.40 | DN63 | 2.1/2” | -40 | 63,5 | 75 | 4,5 | 650 | 18 | 2610 | 760 | 2,35 |
| 1SN-48 | 10.1002.48 | DN76 | 3” | -48 | 76,2 | 88 | 3,5 | 510 | 14 | 2030 | 900 | 2,55 |
| Reference | # | DN | inch | SAE Dash | mm |
| 1SN-03 | 10.1002.03 | DN5 | 3/16” | -3 | 4,8 |
| 1SN-04 | 10.1002.04 | DN6 | 1/4” | -4 | 6,3 |
| 1SN-05 | 10.1002.05 | DN8 | 5/16” | -5 | 8 |
| 1SN-06 | 10.1002.06 | DN10 | 3/8” | -6 | 9,5 |
| 1SN-08 | 10.1002.08 | DN12 | 1/2” | -8 | 12,7 |
| 1SN-10 | 10.1002.10 | DN16 | 5/8” | -10 | 16 |
| 1SN-12 | 10.1002.12 | DN19 | 3/4” | -12 | 19 |
| 1SN-16 | 10.1002.16 | DN25 | 1” | -16 | 25,4 |
| 1SN-20 | 10.1002.20 | DN31 | 1.1/4” | -20 | 32 |
| 1SN-24 | 10.1002.24 | DN38 | 1.1/2” | -24 | 38 |
| 1SN-32 | 10.1002.32 | DN51 | 2” | -32 | 50,8 |
| 1SN-40 | 10.1002.40 | DN63 | 2.1/2” | -40 | 63,5 |
| 1SN-48 | 10.1002.48 | DN76 | 3” | -48 | 76,2 |
| Reference | | | | | | ||
| mm | MPs | PSI | Mps | PSI | mm | kg/m | |
| 1SN-03 | 11,4 | 25 | 3700 | 100 | 14800 | 89 | 0,23 |
| 1SN-04 | 13 | 22,5 | 3300 | 90 | 13200 | 100 | 0,23 |
| 1SN-05 | 14,7 | 21,5 | 3200 | 85 | 12800 | 114 | 0,23 |
| 1SN-06 | 17,2 | 18 | 2700 | 72 | 10800 | 127 | 0,33 |
| 1SN-08 | 20,5 | 16 | 2400 | 64 | 9600 | 178 | 0,42 |
| 1SN-10 | 23,8 | 13 | 1900 | 52 | 7400 | 200 | 0,52 |
| 1SN-12 | 27,8 | 10.5 | 1600 | 42 | 6400 | 240 | 0,65 |
| 1SN-16 | 35,9 | 8,8 | 1300 | 35 | 5200 | 300 | 1 |
| 1SN-20 | 44 | 6,3 | 920 | 25 | 3680 | 419 | 1,3 |
| 1SN-24 | 50,8 | 5 | 730 | 20 | 2920 | 500 | 1,63 |
| 1SN-32 | 64,3 | 4 | 580 | 16 | 2320 | 630 | 2 |
| 1SN-40 | 75 | 4,5 | 650 | 18 | 2610 | 760 | 2,35 |
| 1SN-48 | 88 | 3,5 | 510 | 14 | 2030 | 900 | 2,55 |
INNER TUBE: seamless oil resistant synthetic rubber
REINFORCEMENT: 1 high tensile steel wire braid
OUTER TUBE: black wrapped, oil, weather and abrasion resistant synthetic rubber
SAFETY FACTOR: 4:1
APPLICATION: petroleum base hydraulic fluids
TEMPERATURE RANGE: -40ºC (-40ºF) +100ºC (+212ºF); Intermittent service: +120ºC (+248ºF) Max. temperature recommended for water base hydraulic fluids: +70ºC (+158ºF) Max. temperature recommended for air: +60ºC (+140ºF)
COUPLINGS: Balflex® 2-piece fittings serie 23 with 20 serie ferrules Balflex® Multicrimp fittings serie BW23/ BF21/P23
AVAILABLE VERSIONS: Smooth cover (Shark Skin) / High Temperature (Tropic) / Low Temperature (Artic) / Tough Cover (Armourguard)
COVER: U.S. MSHA APPROVED
NOTES: Sizes -40 (2.1/2”) and – 48 (3”) not included in the standards. Balflex® hydraulic hose DIN EN 853 1SN / SAE 100R1AT has a very superior working and burst pressure compared with only SAE 100R1AT