Nachi Pressure Control Valve

Explore various types of Nachi Solenoid Valves that meet your needs only at PT Pandu Hydro Pneumatics, an authorized distributor of Nachi in Indonesia.

Nachi Pressure Control

Specifications

  • Flow : 20 – 380 L/min
  • Max. Pressure : 21 MPa

Description

  • High pressure capacity balanced piston relief valve
  • Optimum pressure control for hydraulic circuit allows operation as a safety valve
  • A vent port enables remote control of pressure and use of an unloading circuit.
  • ISO standard mounting service
Nachi Pressure Control Valve RI

Specifications

  • Flow : 40– 320 L/min
  • Max. Pressure : 35 MPa

Description

  • High pressure capacity balanced piston relief valve
  • Optimum pressure control for hydraulic circuit allows operation as a safety valve
  • A vent port enables remote control of pressure and use of an unloading circuit.
  • ISO standard mounting service
Nachi RC

Specifications

  • Flow : 2 to 15 L/min
  • Pressure : 21 MPa

Description

  • Connecting a relief valve or reducing valve to the vent port of a balanced piston type pressure control valve provides simple remote control of pressure.
  • RCD type can also be used as a direct type relief valve.
Nachi Pressure Control valve

Specifications

  • Max Flow : 30 – 380 L/min
  • Max. Pressure : 21 MPa

Description

  • This valve adds a wet type solenoid valve to a balanced type piston type relief valve to form a hydraulic device unload circuit.
  • The shockless type has an internal structure that prevents shock generated during unloading. This valve can also be used in a pressure relief circuit, and has a maximum adjustment time of three seconds. See the pressure relief circuit example.
  • A two-pressure control circuit can be configured by adding a relief modular valve. Contact your agent for more information.
Nachi Pressure Reducing and check valve

Specifications

  • Flow : 20 to 280 L/min
  • Pressure : 21 MPa

Description

  • This valve is used when part of the circuit uses pressure that is lower than the main circuit.
  • Even when pressure changes in the primary main circuit, the reduced secondary pressure is adjusted automatically and maintained at a constant level.
  • Connecting a remote control valve to the vent port allows remote control of adjustment pressure.
  • The mounting surface of the gasket conforms to the ISO standards shown in the table below.
Nachi Pressure Control

Specifications

  • Flow : 30 to 50 L/min
  • Pressure : 14 MPa

Description

  • 2-in-1 operation allows a simpler circuit configuration. Combination valve that provides both pressure reducing and counter balance functions.
  • Pressure adjustment using a single screw (bolt).
  • Compact and lightweight valve that can be mounted using the same methods as a 01, 03 size solenoid valve.
Nachi (C) Q Valve

Specifications

  • Max. Flow : 50 – 280 L/min
  • Maximum working pressure: 14 MPa

Description

  • This circuit control valve works as a sequence valve, unloading valve, and counter balance valve.
  • Maximum operating pressure is 21MPa {214kgf/cm2}.
  • Though a direct type valve, there is little pressure override.
  • The mounting surface of the gasket conforms to the ISO standards